Sanyo PLC-WL2500 - Image Mode Selection

40
HDMI
ASPECT
Image select Menu
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Colorboard,
Image 1,Image 2, Image 3,andImage 4 by pressingthe
IMAGEbuttonontheremotecontrol.
Standard
Picturemodeadjustedwithfinetone.
Cinema
Blackboard (Green)
Image 1-4
IMAGE button
Dynamic
Cinema
Image Mode Selection
Fortheimageprojectedonablackboard.
Thismodehelpsenhancetheimageprojectedona
blackboard.Thisismainlyeffectiveonagreencolored
board,nottrulyeffectiveonablackcoloredboard.
Blackboard (Green)
Dynamic
Standard
Remote Control
IMAGE button
Forviewingpicturesinabrightroom.
Normalpicturemodepresetontheprojector.
Forviewingwiththe user presetimagemodeinthe Image
adjustMenu(seepages41-42).
1
2
Image 1
Image 2
Image 3
Image 4
Colorboard
Colorboard
PressthePoint
►
buttonatColorboard,andthenusethe
Point
▲▼
 buttons to switch the desired item (Red, Blue,
Yellow,Green)andthenpresstheSELECTbutton.
Atthetimeofsimpleprojectiononthecoloredwall,youcan
gettheclosecolorimagetothecolorimageprojectedona
whitescreenbyselecting the similarcolortothewall color
fromthepresetfourcolors.
PresstheMENUbuttontodisplaytheOn-ScreenMenu.
UsethePoint▲▼buttonstoselectImage selectand
thenpressthePoint►ortheSELECTbutton.
UsethePoint▲▼buttonstoselectthedesireditem
andthenpresstheSELECTbutton.
Video Input
Direct Operation
Menu Operation