Sanyo PLC-WL2500 - Connecting to a Computer

14
Installation
Connecting to a Computer
Cables used for connection
•VGAcables(MiniD-sub15pin)*
•Audiocables
•HDMI-DVIcable
(*Onecableissupplied;othercablesarenotsuppliedwiththeprojector.)
Note:
•InputsoundtotheCOMPUTER/COMPONENTAUDIOIN
terminalwhenusingtheCOMPUTERIN1/COMPONENTIN
terminalasinput.
•Whenthecableisofthelongervariety,itisadvisableto
usetheCOMPUTERIN1/COMPONENTINandnotthe
COMPUTERIN2/MONITOROUT.
• AnalogRGBandcomponentsignalscanbeoutputfromthe
COMPUTERIN2/MONITOROUTterminalwhenusingthe
COMPUTERIN2/MONITOROUTterminalasoutput.
Unplugthepowercordsofboththe
projectorandexternalequipment
fromtheACoutletbeforeconnecting
cables.
ExternalAudioEquipment
Audiocable
(stereo)
Monitor
Output
AudioOutput
AUDIOOUT
(stereo)
AudioInput
VGA
cable
COMPUTERIN2/
MONITOROUT
COMPUTERIN1/
COMPONENTIN
MonitorOutput
or
MonitorInput
VGA
cable
HDMI-DVI
cable
DVI
Output
HDMI
Thisterminalis
switchable.Setup
theterminalas
COMPUTERIN2or
MONITOROUT.
(P.50)
COMPUTER/
COMPONENT
AUDIOIN
Audiocable
(stereo)