Sanyo PLC-WL2500 - Page 42

42
Use the Point ◄► buttons to adjust the gamma value to
obtainabetterbalanceofcontrast(from0to15).
Gamma
PressthePoint◄buttontodecreasethesharpnessofthe
image;pressthePoint►buttontoincreasethesharpness
oftheimage(from0to15).
Sharpness
An interlaced video signal can be displayed in progressive
mode.Selectoneofthefollowingoptions.
Off.........Disabled.
L 1.........Foranactivepicture.
L 2.........Forastillpicture.
Film.......Forwatchingafilm.Withthisfunction,the
projectorreproducespicturesfaithfultothe
originalfilmquality.
Progressive
Noise reduction
Noise interference on the screen can be reduced. Select
oneofthefollowingoptionstogetsmootherimages.
Off.........Disabled.
L 1.........Lowerreduction.
L 2.........Higherreduction.
Note:
Noise reductionandProgressivecannotbeselected
when480p,575p,720p,1035ior1080iisselected
(p.39),or VideodelaycontrolfunctionissettoOnin
Settingmenu(p.57).
Toresettheadjusteddata,selectResetandpressthe
SELECTbutton.Aconfirmationboxappearsandthenselect
Yes.Alladjustmentswillreturntotheirpreviousfigures.
Reset
Store
Tostoretheadjusteddata,selectStoreandpressthePoint
►buttonortheSELECTbutton.UsethePoint▲▼buttons
toselectonefromImage1to4andpresstheSELECT
button.
AconfirmationboxappearsandthenselectYes.Stored
datacanbecalledupbyselectinganImage(1-4)inthe
ImageModeSelectiononpage40.
Store Menu
Aconfirmationbox
appearsandthen
selectYes.
Video Input