Sanyo PLC-WL2500 - Page 58

58
Factory default
ThisfunctionreturnsallsettingvaluesexceptfortheUser
logo,PIN code lock,Logo PIN code lock,Lamp counter
andFilter countertothefactorydefaultsettings.
Factory default
Warning log
Thisfunctionrecordsanomalousoperationswhilethe
projectorisinoperationanduseitwhendiagnosingfaults.
Upto10warninglogsaredisplayedwiththelatestwarning
messageatthetopofthelist,followedbypreviouswarning
messagesinchronologicalorder.
Note:
 WhentheFactorydefaultfunctionisexecuted,allthe
warninglogrecordswillbedeleted.
Setting
Thisfunctionisusedtosetafrequencyforthefilter
replacing.
Whentheprojectorreachedaspecifiedtimebetween
replacings,aFilterwarningiconappearsonthescreen,
notifyingthereplacingisnecessary.Afterreplacingthe
filter,besuretoselectRESETandsetthetimer.TheFilter
warningiconwillnotturnoffuntilthefiltercounterisreset.
Fordetailsaboutresettingthetimer,referto“Resettingthe
FilterCounter”onpage61.
Filter counter
Filter counter
PresstheSELECTbuttontoselectTimer,
andthenusethePoint▲▼buttonstosetthe
timer.Selectfrom(Off/2000H/3000H/4000H)
dependingontheuseenvironment.
Filterwarningiconappearsonthescreenatasettime(Off/2000H/
3000H/4000H).
Fig.1Filterwarningicon
Note:
Thisiconalsoappearsatturningon.
Note:
  TheFilterwarningicon(Fig.1)willnotappearwhenthe
DisplayfunctionissettoOff(p.46),orFreeze (p.25),or
No show(p.26).