Sanyo PLC-XE33

26
Basic Operation
blackout→normal→blackout→normal
•••••
PresstheNOSHOWbuttonontheremotecontroltoblackout
the image. To restore to normal, press the NO SHOW button
againorpressanyotherbutton.Thescreenchangeseachtime
youpresstheNOSHOWbuttonasfollows.
NO SHOW button
PresstheP-TIMERbuttonontheremotecontrol.TheP-Timer
display00:00appearsonthescreenandthecountdownstarts
(00:00–59:59).
Tostopthecountdown,presstheP-TIMERbutton.Tocancel
theP-Timerfunction,presstheP-TIMERbuttonagain.
P-TIMER button
PresstheIMAGEbuttonontheremotecontroltoselecta
desiredimagemodeofthescreen.Seepages32,39for
details.
IMAGE button
No show disappearsafter4seconds.
P-Timerdisplay
Note:
 Seethepreviouspageforthedescriptionof
otherbuttons.
IMAGE button
NO SHOW button
P-TIMER button
SCREEN button
Selectthescreensize(Seepages34-35,42fordetails).
SCREEN button
Downloaded From projector-manual.com Sanyo Manuals