23
Configuring the Scale
Menu level 1
Menu level 2
Menu level 3
Factory setting
Menu level 4
Factory setting
Setup – Application 1 – see previous page
Application
menu Application 2
o
Off
(Control
functions) Checkweighing Activation of port lines
o
Within check range
Always on
Stability and check range
At stability
Stability + check range -> on
Type of checkweighing
o
Target, min, max weight
input Min, max weight
Target, min in %, max in %
Weight display mode
o
Absolute value
Difference from target
Automatic printout Yes
of OK values
o
No
Time-controlled Function after time Beep (acoustic signal)
functions interval Lock-in readout
o
Automatic printout
Store value in App. 3 memory
Automatic function
o
On
restart Off
Stability-dependent
o
Without stability
storage mode After stability
After increased stability
Tare after printout Off
o
On
Application 3
o
Off
(Data records)
Totalizing Automatic storage
o
Off
On, first value at stability
On, last value at stability
On, value 70% –130% at stab.
Minimum load for None
automatic storage
o
10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1,000 digits
Source of data for auto storage – see next page
Formulation – see next page
Application 3 through – see following pages
Basic Settings
To Next Page
Loading...
Need help?
General