Sartorius Factory Series FC06BBE-S - Page 38

38
8. Select Cal./adjustment sequence q soft key
and confirm O soft key
o = last selected setting
9. Select other settings, if desired Q and l soft keys
and confirm (e.g., Calibration
with automatic adjustment)
10.Exit Cal./adjustment sequence o soft key
11.Select isoCAL function q soft key twice
and confirm O soft key
o = last setting selected
12.Select other settings, if desired q soft key repeatedly
and confirm (e.g., turn off l soft key
isoCAL function)
13.Save settings and M
exit the Setup menu