84
Manual Storage (M+)
Purpose
With this function you can load
weight values and calculation results
directly from Application 1 (e.g.,
counting, weighing in percent) or
Application 2 (checkweighing, time-
controlled functions) into Application
3 (totalizing, formulation, statistics).
Available Features
– You can assign this function to
the fourth or fifth soft key (from the
right), i.e. F4 or F5
The soft key designation for this
function is: M+
– An Application 3 program
(totalizing, formulation or
statistics) must be running so you
can display and print the result
Factory Settings
There are no optional parameters
Preparation
§ Turn on the scale: Press e/[ON/OFF]
> Sartorius logo is displayed, self-test is performed
§ Select Extra function (F4) or Extra function (F5) in the Setup menu:
Press M
§ Select the Application menu: App soft key
§ Select Extra func. (F4) or Extra func. (F5)
§ Select Man. store in app.3 memory (M+)
§ Confirm Man. store in app.3 memory (M+)
see also the “Application Menu (Overview)” in the chapter entitled
“Configuring the Scale”
§ Save settings and exit the Setup menu: Press M
To Next Page
Loading...
