Operating the Scale
83
Practical Example
Include company address as well as the lot number of the sample on printout.
Include this ID on every printout of the net value.
Settings (changes in the factory settings required for this example):
Setup: App: Extra function(F4): Identification codes: Printout: Each time the print key is pressed
Step Key (or instruction) Display/Output
1. If necessary: turn on the scale e/[ON/OFF]
and enter the settings given above
2. Select Identification code input ID soft key
3. Enter data for ID1: a ...
(here: Sartorius) see also page 34
4. Confirm input l soft key
5. Repeat steps 3 and 4 for
ID2: GOETTINGEN
ID3: WEENDER STRASSE
ID4: LOT 15
6. Place the first sample on the Place load on the scale
scale (here: 210.53 g)
7. Print weight value p/[PRINT]
(If desired, perform further weighing
operations and print values)
8. When weighing is completed, ID soft key
delete each ID code Press the Delete soft key
4 times
To Next Page
Loading...
Need help?
General