SATO CL4NX Plus Driver Manual

4
Before You Start
A printer driver is software that sends data created on a computer (documents and illustrations) to the
printer and print it on a label. The CL4NX Plus Printer Driver Manual (hereinafter, "this manual")
describes how to obtain and install the printer driver for the CL4NX Plus (hereinafter, "the product"). It
also describes how to configure various settings after installing the printer driver, and how to uninstall
and update the printer driver.
Printer Driver Screenshots Used in This Manual
This manual mainly uses screenshots of the printer driver for the product captured on Windows 10.
Therefore, the screen layout may differ depending on the OS that you are using.
Limitation of Liability
SATO Corporation and its subsidiaries in Japan, the U.S. and other countries make no
representations or warranties of any kind regarding this material, including, but not limited to, implied
warranties of merchantability and fitness for a particular purpose. SATO Corporation shall not be held
responsible for errors contained herein or any omissions from this material or for any damages,
whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution,
performance or use of this material.
Specifications and contents in this document are subject to change without notice.
Trademarks
 SATO is a registered trademark of Sato Holdings Corporation and its subsidiaries in Japan, the
U.S. and other countries.
 Wi-Fi
®
is a registered trademark of Wi-Fi Alliance.
 Windows is a registered trademark of Microsoft Corporation in the United States and/or other
countries.
 Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
 All other trademarks are the property of their respective owners.
Copyrights / Other Matters
Any unauthorized reproduction of the contents of this document, in part or whole, is strictly prohibited.
First Edition October 2019
© 2019 SATO Corporation. All rights reserved.

SATO CL4NX Plus Specifications

General

Display type	LCD
Product color	Black
Built-in display	Yes
Display diagonal	3.5 \
Type	POS printer
Color	No
Print speed	14 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	305 x 305 DPI
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Maximum media length	600 mm
Maximum roll diameter	254 mm
Supported paper width	39.5 - 128 mm
Maximum printing width	128 mm
Printing media thickness	0.06 - 0.268 µm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Wi-Fi	-
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0+HS
Standard interfaces	Bluetooth, Ethernet, RS-232C, Serial, USB 2.0
Serial interface type	RS-232C
USB 2.0 ports quantity	3
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	271 mm
Width	457 mm
Height	321 mm
Weight	15100 g