SATO CL4NX Plus Driver Manual

100
7. Uninstalling the Printer Driver
The installer (PrnInst.exe) is also used to uninstall the printer driver.
Caution
Do not use [Remove device] in [Devices and Printers]. The printer driver may not be
uninstalled correctly.
Pre-checks
Check the following items before uninstalling the printer driver.
Is the Installer (PrnInst.exe) on the Computer?
If PrnInst.exe is not on the computer, obtain it from the SATO download site.
For details, refer to "1.1 Preparing the Printer Driver."
Is the USB Cable Disconnected from the Computer?
When uninstalling the printer driver of a product connected to a computer via USB, power off the
product and disconnect the USB cable connecting the product from the computer.
Uninstalling the Printer Driver
Double-click PrnInst.exe. 1.
Click [Next]. 2.
Click [Uninstall Printer Drivers]. 3.

SATO CL4NX Plus Specifications

General

Display type	LCD
Product color	Black
Built-in display	Yes
Display diagonal	3.5 \
Type	POS printer
Color	No
Print speed	14 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	305 x 305 DPI
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Maximum media length	600 mm
Maximum roll diameter	254 mm
Supported paper width	39.5 - 128 mm
Maximum printing width	128 mm
Printing media thickness	0.06 - 0.268 µm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Wi-Fi	-
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0+HS
Standard interfaces	Bluetooth, Ethernet, RS-232C, Serial, USB 2.0
Serial interface type	RS-232C
USB 2.0 ports quantity	3
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	271 mm
Width	457 mm
Height	321 mm
Weight	15100 g