SATO CL4NX Plus Driver Manual

75
Page Setup 4.1
Printer settings
[Stock]
Select the default stock from the registered stock. If you select [Custom], you can set
[Width], [Height], and [Sensors] on this screen.
[Custom stock has ID 257]
This check box enables compatibility with older SATO printer drivers that require a custom
stock ID of greater than 256.
[Copies]
Specify the number of labels to be issued.
Media settings
[Width]
This setting shows the width set for the stock that you selected. If you select [Custom] for
[Stock], you can change the settings on this screen.
[Height]
This setting shows the height set for the stock that you selected. If you select [Custom] for
[Stock], you can change the settings on this screen.
[Media type]
This setting shows the sensor set for the stock that you selected. If you select [Custom] for
[Stock], you can change the settings on this screen. You can select [Continuous labels],
[Labels with gaps], or [Labels with black marks].
[Rotation]
You can set the print rotation angle as [0° - Portrait], [90° - Landscape], [180° - Portrait], or
[270° - Landscape].
[Mirror label]
You can specify printing to be a mirror image.

SATO CL4NX Plus Specifications

General

Display type	LCD
Product color	Black
Built-in display	Yes
Display diagonal	3.5 \
Type	POS printer
Color	No
Print speed	14 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	305 x 305 DPI
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Maximum media length	600 mm
Maximum roll diameter	254 mm
Supported paper width	39.5 - 128 mm
Maximum printing width	128 mm
Printing media thickness	0.06 - 0.268 µm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Wi-Fi	-
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0+HS
Standard interfaces	Bluetooth, Ethernet, RS-232C, Serial, USB 2.0
Serial interface type	RS-232C
USB 2.0 ports quantity	3
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	271 mm
Width	457 mm
Height	321 mm
Weight	15100 g