SATO CL4NX Plus Driver Manual

58
Command Font Settings and Usage Example 3.2.2
Command font is a virtual font for directly sending commands to the product. You can use features
that are not directly supported by the printer driver. Knowledge of SATO Barcode Printer Language
(SBPL) command is necessary to use command font. For details on SBPL commands, refer to
"CL4NX Plus Programming Reference."
[Name]
Set the name of the command font that you want to register.
This name is shown on the font list in the application.
[Description]
You can enter a description of the command font to be registered.
[Prefix] [Suffix]
Specify how the text is to be supplied. The specified text can be appended to the front or the end
of a command.
[No prefix]: A prefix is not used.
[No suffix]: A suffix is not used.
[File]: Prefixes and suffixes are loaded from an external file and appended to the data.
[Parsed file]:
Prefixes and suffixes are loaded from an external file and appended to the data. Reserved
variables can be included and are converted to data during printing.
[Text]: Prefixes and suffixes are appended directly as text.
[Parsed text]:
Prefixes and suffixes are appended directly as text. Reserved variables can be included and
are converted to data during printing.

SATO CL4NX Plus Specifications

General

Display type	LCD
Product color	Black
Built-in display	Yes
Display diagonal	3.5 \
Type	POS printer
Color	No
Print speed	14 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	305 x 305 DPI
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Maximum media length	600 mm
Maximum roll diameter	254 mm
Supported paper width	39.5 - 128 mm
Maximum printing width	128 mm
Printing media thickness	0.06 - 0.268 µm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Wi-Fi	-
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0+HS
Standard interfaces	Bluetooth, Ethernet, RS-232C, Serial, USB 2.0
Serial interface type	RS-232C
USB 2.0 ports quantity	3
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	271 mm
Width	457 mm
Height	321 mm
Weight	15100 g