SATO CL4NX Plus Driver Manual

6
Precautions When Installing the Printer Driver
 Before starting the installation, close all applications.
 When you perform the printer driver setup, the properties settings, or the print settings, log in
with Administrator Privileges.
 When you use the printer driver, enable bi-directional communication.
 If the terminal service is being started with Windows Server 2008, or the remote desktop service
is being started with Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2,
Windows Server 2016, or Windows Server 2019, change the terminal service or remote desktop
service to the installation mode. However, it is not guaranteed that the printer driver can be used
in the terminal service or remote desktop service environment.
 When using multiple products, it is necessary to install as many printer drivers as products, to
identify each product.

SATO CL4NX Plus Specifications

General

Display type	LCD
Product color	Black
Built-in display	Yes
Display diagonal	3.5 \
Type	POS printer
Color	No
Print speed	14 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	305 x 305 DPI
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Maximum media length	600 mm
Maximum roll diameter	254 mm
Supported paper width	39.5 - 128 mm
Maximum printing width	128 mm
Printing media thickness	0.06 - 0.268 µm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Wi-Fi	-
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0+HS
Standard interfaces	Bluetooth, Ethernet, RS-232C, Serial, USB 2.0
Serial interface type	RS-232C
USB 2.0 ports quantity	3
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	271 mm
Width	457 mm
Height	321 mm
Weight	15100 g