SATO CL4NX Plus Driver Manual

77
Advanced settings
[Set fixed document length for continuous label]
Feed the entire label to an appropriate position after the product finishes printing. For a
continuous label, the one label is the feed amount because the feed amount cannot be
determined by the sensor.
[Non-standard protocol output]
Substitute and output part of the control code as ASCII readable characters. This feature is
for host environments that cannot use binary data.
[Cancel all current and queued printing documents]
Delete all jobs from the product buffer. Use this setting when you want to cancel the
preceding jobs and print a new job immediately.
Caution
You cannot cancel this command. Take care when using it.
[Send static elements only on first page (Overlay function)]
All static elements will be sent to only the first page of the print job. Only variable elements
will be sent for subsequent pages. Static elements are called from the product memory.
[Use legacy calendar print command]
Print the calendar by using the legacy <WA> command. If the option is unchecked, <WU>
command is used instead.
[Use legacy RFID locking command]
Lock the RFID tag using the legacy "lck" command. If the option is unchecked, "lc2"
command is used instead.
Export to printer
[Format number]
This setting is used when the XML-Enabled feature is used. For details, refer to
"XML-Enabled Reference."

SATO CL4NX Plus Specifications

General

Display type	LCD
Product color	Black
Built-in display	Yes
Display diagonal	3.5 \
Type	POS printer
Color	No
Print speed	14 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	305 x 305 DPI
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Maximum media length	600 mm
Maximum roll diameter	254 mm
Supported paper width	39.5 - 128 mm
Maximum printing width	128 mm
Printing media thickness	0.06 - 0.268 µm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Wi-Fi	-
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0+HS
Standard interfaces	Bluetooth, Ethernet, RS-232C, Serial, USB 2.0
Serial interface type	RS-232C
USB 2.0 ports quantity	3
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	271 mm
Width	457 mm
Height	321 mm
Weight	15100 g