SATO HT200e - Page 104

SECTION 5 ： PRESET, TABLE DATA
Page 5-12 SATO HT200e
MODIFICATION FOR TABLE DATA
[FNC1]
[
→ ]
[
→ ]
[ENTR]
[ENTR]
[ENTR]
ＦＯＲＭＡＴ Ｎｏ
1［
・ ・］
ＨＴ２００ｅ
ＴＡＢＬＥ ＳＴＯＲＩＮＧ
2
Ｔ Ａ Ｂ Ｌ Ｅ １ ＴＡＢＬＥ２
ＴＡＢＬＥ３
ＴＡＢＬＥ１
3
Ｓ Ｔ Ｒ ＭＯＤＩＦＹ ＤＥＬ
ＴＡＢＬＥ１
4 ＳＴＲ
Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ ＤＥＬ
ＭＯＤＩＦＹ ＴＡＢＬＥ Ｎｏ
5［
・ ・・ ］
［ＴＡＢＬＥ１］
6
Ｙ ｅｌｌｏｗ
Press [FNC1], so that it goes from the modes of
the print of format to the table data.
The screen for the selection of table data registra-
tion will be displayed: Press [
→ ], so that it goes to
the screen for the process No. 4.
The screen for the selection of data registration
area will be displayed: Press [ENTR], so that it
goes to the selection for table data registration.
The screen for the selection of the modification of
table data will be displayed: Press [ENTR], so that
it goes to the entry of table number.
Table data can be entered: Enter table data, and
press [ENTR], so that one table data will be regis-
tered, returning to the entry of table number,
Table No. can be entered: Press [ENTR], so that it
goes to the entry of table data.