SECTION 2: INSTALLATION AND SETUP
SATO HT200e Page 2-25
PROCESS FOR TRANSFER OF FONT ON THE SCREEN (CURRENCY MARK
FONT)
6 + Power “ON”
[
←
][
→
]
[
←
][
→
]
[
←
][
→
]
Or:
Or:
Font for currency mark that is transferred from a host computer will be registered in a printer. The font registered
in the printer can be transferred to the host.
Note: When font for currency mark is transferred, on-line cable must be connected to the host before turning the
power “ON”.
ＰＡＲＡＭＥＴＥＲ ＣＯＰＹ
ＰＲＩＮＴＥＲ ←→ ＣＡＲＤ
ＤＡＴＡ ＳＴＯＲＥ／ＲＣＡＬＬ
2
ＰＲＩＮＴＥＲ ←→ ＨＯＳＴ
ＰＲＥＳＥＴ ＳＴＲ／ＲＣＡＬ
Ｌ
3
ＰＲＩＮＴＥＲ ←→ ＨＯＳＴ
ＦＯＮＴ ＳＴＯＲＥ／ＲＣＡＬＬ
4
ＰＲＩＮＴＥＲ ←→ ＨＯＳＴ
ＦＯＮＴ ＳＥＮＤ／ＲＥＣ
5
Ｈ Ｔ → Ｈ Ｏ Ｓ Ｔ ＨＯＳＴ→ＨＴ
ＨＴ→ＨＯＳＴ ＳＥＮＤ ＯＫ？
Ｙ ／Ｎ
ＨＯＳＴ→ＨＴ ＲＥＣ ＯＫ
？
Ｙ ／Ｎ
ＳＥＮＤＩＮＧ
ＩＴＥＭ
:
０００１
ＲＥＣＥＩＶＩＮＧ
ＩＴＥＭ
:
０００１
Press [ENTR], so that it goes to the screen for the
selection of transferring print parameter.
Press [
←
], so that it returns to the process No. 1.
Press[
→
], so that it goes to the process No. 3.
Press [ENTR], so that it goes to the screen for the
selection of copying print parameter.
Press [
→
], so that it goes to the process No. 2.
Press [ENTR], so that it goes to the screen for the
selection of transfering preset.
Press [
←
], so that it returns to the process No. 2.
Press[
→
], so that it goes to the process No. 4
Press [ENTR], so that it goes to the screen for the
selection of transfering font.
Press[
←
], so that it returns to the process No. 3.
For the transfering direction, select [
←
] and [
→
],
and press [ENTR] to go to the screen for the
confirmation of the transfer.
Press [ENTR], so that it goes to the screen for the
selection of transfering preset.
Press [
←
], so that it returns to the process No. 2.
Press [ENTR]:
“Y” is to start transferng.
“N” is to return to the process No. 4.
When sending one item is complete, the number o
items will be added.
After sending, it returns to the process No. 4.
When receiving one item is complete, the number o
items will be added.
After receiving, it returns to the process No. 4.
To Next Page
Loading...
