SECTION 2: INSTALLATION AND SETUP
SATO HT200e Page 2-29
PROCESS ON THE SCREEN FOR EAN COUNTRY CODE SETTING
6 + Power “ON”
[
←
][
→
]
[
←
][
→
]
[
←
][
→
]
[
←
][
→
]
[
←
][
→
]
[
←
][
→
]
[
←
][
→
]
Note: When EAN COUNTRY CODE is entered, or when either AC is pressed without no numeric entry or [
←
] or
[
→
] is used after entering value in 1 digit (or less than 2 digits), DEFAULT will return to 50.
ＰＡＲＡＭＥＴＥＲ ＣＯＰＹ
1 ＰＲＩＮＴＥＲ ←→ ＣＡＲＤ
ＤＡＴＡ ＳＴＯＲＥ／ＲＣＡＬＬ
2 ＰＲＩＮＴＥＲ ←→ ＨＯＳＴ
ＰＲＥＳＥＴ ＳＴＲ／ＲＣＡＬＬ
3 ＰＲＩＮＴＥＲ ←→ ＨＯＳＴ
ＦＯＮＴ ＳＴＯＲＥ／ＲＣＡＬＬ
4 ＰＲＩＮＴＥＲ ←→ ＨＯＳＴ
ＴＡＢＬＥ ＳＴＲ／ＲＣＡＬＬ
5 ＰＲＩＮＴＥＲ ←→ ＨＯＳＴ
ＣＵＲＲＥＮＣＹ ＳＥＬＥＣＴ
6
ＣＡＲＤ ＣＬＥＡＲ
7
ＥＡＮ ＣＯＵＮＴＲＹ ＣＯＤＥ
8
５ ０
Press [ENTR], so that it goes to the screen for the
selection of transferring print parameter.
Press [
←
], so that it returns to the process No. 1.
Press [
→
], so that it goes to the process No. 3.
Press [ENTR], so that it goes to the screen for the
selection of copying print parameter.
Press [
→
], so that it goes to the process No. 2.
Press [ENTR], so that it goes to the screen for the
selection of transfering preset.
Press [
←
], so that it returns to the process No. 2.
Press [
→
], so that it goes to the process No. 4.
Press [ENTR], so that it goes to the screen for the
selection of transfering font.
Press [
←
], so that it returns to the process No. 3.
Press
→
so that it
oes to the
rocess No. 5.
Press [ENTR], so that it goes to the screen for the
selection of transfering table data.
Press [
←
], so that it returns to the process No. 4.
Press [
→
], so that it goes to the process No. 6.
Press [ENTR], so that it goes to the screen for the
selection of currency mark.
Press [
←
], so that it returns to the process No. 5.
Press [
→
], so that it goes to the process No. 7.
Press [ENTR], so that it goes to the screen for the
selection of the card clear type.
Press [
←
], so that it returns to the process No. 6.
Press [
→
], so that it goes to the process No. 8.
[0] to [9] can be set in 2 digits, so that it permits the
entry ranging from 00 to 99.
Press [
←
] , so that it returns to the process No. 7.
To Next Page
Loading...
