SATO HT200e - Page 86

SECTION 4 ： FREE MODE
SATO HT200e Page 4-23
DISPLAY ON THE SCREEN FOR PRICE FIELD
Field No. Position of digit
It will go to the entry for character pitch.
Note: Use [FMT] to return to the entry of the format number to be registered.
Press [ENTR] to determine the data selected, so that the entry for fixed data can be reached.
０１ ０１ : ＦＬＤ ＴＹＰＥ
1 ２ : ＰＲＩＣＥ ▽
０ ０００００００００００００００
０１ ０２ : ＤＡＴＡ ＴＹＰＥ
2 ０ : ＳＴＡＮＤＡＲＤ １ : ＰＯＰ
２
０ ００００００００００００００
０１ ０３ : ＦＯＮＴ ＴＹＰＥ
3０:Ｘ１ １:Ｘ２ ２:Ｘ３ ▽
２０
０ ０００００００００００００
０１ ０４ : Ｖ－ＰＯＳＩＴＩＯＮ
4
２０２
０ ００００００００００００
０１ ０７ : Ｈ－ＰＯＳＩＴＩＯＮ
5
２０２０２５
０ ０００００００００
０１ １０ : ＲＯＴＡＴＩＯＮ
6０:０° １:９０° ▽
２０２０２５０３２
０ ００００００
Enter “2” for the field type.
For the data type:
1) Enter “0” in case of Standard.
2) Enter “1” in case of POP.
Value in one digit can be entered for the character type:
1) For Standard, select the value from “0”, “1”, “2”, and
“5”.
2) For POP, select from “0”, “1”, and “2”.
Value in 3 digits can be entered for the vertical position:
Select the values from “001” to “784”.
Note: “000” is a field where only entry is required, so
that no print is made.
Value in 3 digits can be entered for the horizontal
position: Select the values from “001”to “384”.
Value in one digit can be entered for the rotation:
Select the value from “0”, “1”, “2”, and “3”.