SATO HT200e - Page 88

SECTION 4 ： FREE MODE
SATO HT200e Page 4-25
DISPLAY ON THE SCREEN FOR CALENDAR FIELD
Field No. Position of digit
It will go to the entry for character pitch.
Note: Use [FMT] to return to the entry of the format number to be registered.
Press [ENTR] to determine the data selected, so that the entry for fixed data can be reached.
０１ ０１ : ＦＬＤ ＴＹＰＥ
1 ３ : ＣＡＬＥＮＤＡＲ ▽
０ ０００００００００００００００
０１ ０２ : ＤＡＴＡ ＴＹＰＥ
2 ０ : ＤＡＴＥ １ : ＴＩＭＥ
３
０ ００００００００００００００
０１ ０３ : ＦＯＮＴ ＴＹＰＥ
3１:Ｘ２ ２:Ｘ３
３０
０ ０００００００００００００
０１ ０４ : Ｖ－ＰＯＳＩＴＩＯＮ
4
３０１
０ ００００００００００００
０１ ０７ : Ｈ－ＰＯＳＩＴＩＯＮ
5
３０１０２５
０ ０００００００００
０１ １０ : ＲＯＴＡＴＩＯＮ
6 ０:０°１:９０° ▽
３０１０２５０３２
０ ００００００
Enter “3” for the field type.
Enter “0” or “1” for the data type.
Value in 3 digits can be entered for the vertical position:
Select the values from “001” to “784”.
Note: “000” is a field where only entry is required, so
that no print is made.
Value in one digit can be entered for the character type.
Select “1” or “2”.
Value in 3 digits can be entered for the horizontal
position: Select the values from “001” to “384”.
Value in one digit can be entered for the rotation:
Select the value from “0”, “1”, “2”, and “3”.