SATO LC400e Series - Page 113

113
[Format 2]
<EU>aabbcccn~n
●Parameter
a
[Type of composite symbol] = 11 : GS1-128 Composite (CC-A/CC-B)
12 : GS1-128 Composite (CC-C)
b
[Narrow bar width] = 01 to 12 dots
c
[Barcode height] = 001 to 500 dots
*Specify barcode height when narrow bar width is “01”.
*When specifying narrow bar width “03”, Barcode height “100”, Barcode height become 300 dots.
n
[Print data] = Data (Up to 120 digits including 1D and 2D barcode)
Maximum number of digit for the 2D barcode *There is a limit for the barcode.
GS1-128(UCC/EAN128) with CC-A/B
338 digits
GS1-128(UCC/EAN128) with CC-C
2361 digits
Maximun number of digit for the barcode
GS1-128(UCC/EAN128) with CC-A/B
48 digits
GS1-128(UCC/EAN128) with CC-C
48 digits
-To specify the print of composite symbol, delimit one-dimensional data and two-dimensional data with‘|’(7Ch).
Data = One-dimensional data | Two-dimensional data
- Use ‘#’(23h) to specify CC-A/B (Micro RDF), FNC1 (GS) of CC-C (for PDF417) as data.
- 2D data for GS1-128(UCC/EAN128) With CC-A/B can contain up to 338 digits.
- When 2D data of GS1-128(UCC/EAN128) with CC-A/B are less than 56 digits, it is identified as CC-A, and identified as
CC-B when data size is between 57 digits and 338 digits automatically.
- The number of digits varies depending on the width of the barcode in GS1-128(UCC/EAN128) With CC-C, and the
maximum number of digits of combination of the 1D and 2D is 2372 digits.
[Coding Example1]
GS1 DataBar Composite (CC-A/CC-B)
<A>
<V>100<H>100
<EU>01040361234567890|11990102
<Q>1
<Z>
[Coding Example2]
GS1 DataBar Truncated Composite (CC-A/CC-B)
<A>
<V>100<H>100
<EU>02040361234567890|11990102
<Q>1
<Z>
[Coding Example3]
GS1 DataBar Stacked Composite (CC-A/CC-B)
<A>
<V>100<H>100
<EU>03040341234567890|17010200
<Q>1
<Z>
[Coding Example4]
GS1 DataBar Stacked Omni-Directional (CC-A/CC-B)
<A>
<V>100<H>100
<EU>04040341234567890|17010200
<Q>1
<Z>
[Coding Example5]
GS1 DataBar Limited Composite (CC-A/CC-B)
<A>
<V>100<H>100
<EU>05040351234567890|21ABCDEFGHIJKLMNOPQRSTUV
<Q>1
<Z>