SATO LC400e Series - ESC+YS Format Register

237
13.6 Memory Card
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
13.6 ESC+YS Format Register
ESC+YS
HEX Code
ESC
YS
Parameter
<1B>16
<59>16<53>16
,aaa
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter is valid until the next specification is made.
Valid Range between Items
The set parameter is valid until the next specification is made.
[Function]
To register the print format
[Format]
<YS>,aaa
● Parameter
a {Format Register No.} = valid range : 1~999
[Coding Example]
<A>
<CC>1
<YS>,1
</N>,3,3
<%>0<V>100<H>200<P>2<L>0101<XM>ABC
<Z>
[Supplementary Explanation]
1.If there is multiple registration, mark off the 1 format with Data Send Start Specification <A> ~ Data Send End Specification <Z>.
2.When Format Register Specification <YS> is used, the Card Slot Specification <CC> shall be specified before this command.
3.Use it with Field Register Specification </N> as a pair.
4.Error occurs if the registered number is registered again, the content of it will be printed out and continue its process.
5.LC408e/412e does not support optional memory card. Please specify {Flash ROM} with Card Slot Specification <CC>.
[Registerable Command]
Print Position
<V>
<H>
Modification
<WD>
<FW>
<(>
<RF>
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<OA>
<OB>
<RD>
<$=>
<K1>
*1
<K2>
*1
<K8>
*1
<K9>
*1
<k1>
*1
<k2>
*1
<k8>
*1
<k9>
*1
Barcode
<B>
<BC>
<BG>
<BI>
<BP>
<D>
<D><d>
<BD>
2-D Code
<BK>
*2
<BQ>
*2
<BV>
*2
<BX>
*2
<2D10>
*3
<2D12>
*3
<2D20>
*3
<2D30>
*3
<2D31>
*3
<2D32>
*3
<2D50>
*3
<2D51>
*3
Graphic
<G>
<GM>
<GP>
*1 Requires optional Kanji ROM. (Not supported for LC408e/412e.)
*2 Not supported for LC408e/412e.
*3 Supported for LC408e/412e only.
Format Register