SATO LC400e Series - ESC+GR Graphic Re-Call

244
13.11 Memory Card
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
13.11 ESC+GR Graphic Re-Call
ESC+GR
HEX Code
ESC
GR
Parameter
<1B>16
<47>16<52>16
aaa
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify data re-call print that is registered at Graphic Register Specification <GI>
[Format]
<GR>aaa
● Parameter
a {Register No} = valid range : 1~999
[Coding Example]
<A>
<V>100<H>100
<CC>1
<GR>1
<Q>1
<Z>
[Supplementary Explanation]
1.Start Point Correction Specification <A3> is ignore and not corrected.
2.Rotate Specification <%> and Expandable Specification <L> is valid against re-call graphic.
3.When Graphic Re-Call Specification <GR> is used, the Card Slot Specification <CC> shall be specified before Graphic Re-Call Specification
<GR>.
4.LC408e/412e does not support optional memory card. Please specify {Flash ROM} with Card Slot Specification <CC>.
Graphic Re-Call