SATO LC400e Series - 10 2-D Code Command; ESC+BQ QR Code

120
10. 2-D Code Command
10.1 2-D Code
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se
M-84Pro-2/3/6
LC408e/412e
10.1 ESC+BQ QR Code
ESC+BQ
HEX Code
ESC
BQ
Parameter
<1B>
16
<42>
16
<51>
16
Manual Setting abcc,(ddeeff,)g(hhhh)n
Auto Setting abcc,(ddeeff,)n
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify 2-D Code QR Code
[Format]
{Manual Setting } <BQ>abcc,(ddeeff,)g(hhhh)n
{Auto Setting} <BQ>abcc,(ddeeff,)n
● Parameter
a {Error Correction Level} = 1 : 7% High Density Level(L)
2 : 15% Standard Level(M)
3 : 30% Super High Trust Level(H)
4 : 25% Hight Trust Level( Q)
b {Concatenation Mode} = 0 : Normal Mode
1 : Concatenation Mode
c {Single Side Cell Size} = valid range : 01~32 (dot)
e.g.) cc=04
d {Split Number of Concatenation Mode} = valid range : 01~16
e {Sequential Number Split with the Concatenation Mode} = valid range : 01~16
f {Concatenation Mode Parity Data} = valid range : 00~FF
g {Character Mode} = 1 : Numeric Mode
2 : Alphanumeric Mode
3 : Binary Mode
4 : Kanji Mode
h {Data Number} = valid range : 0001~7366
n {Print Data} = Data
[Coding Example] Error Correction Level:30%, Concatenation Mode:Normal, Single Side Cell Size:10
<A>
<V>100<H>200<BQ>3010,112345
<Q>2
<Z>
[Supplementary Explanation]
1.The parity data is the data specified by the hex character which is calculated from all print data of the split 2D code (QR Code) by
XOR.
2.It is not necessary to set data number parameter when character mode is not at binary mode.
QR Code
4
dot
4
dot
Label Feed Direction