SATO LC400e Series - ESC+BL UPC-A Barcode (Without HRI)

116
9.14 Barcode
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se
M-84Pro-2/3/6
LC408e/412e
9.14 ESC+BL UPC-
A Barcode (Without
HRI)
ESC+BL
HEX Code
ESC
BL
Parameter
<1B>16
<42>16<4C>16
aaabbcccn~n
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
Set the height of character barcode of the first digit and the last digit to the same height of the guard bar.
[Format]
<BL>abbcccn~n
●Parameter
a
[Barcode type] = H : UPC-A(Fixed 'H')
b
[Narrow bar] = Valid Range : 01 to 12 dots
c
[Height of Barcode] = Valid Range : 001 to 999 dots
n
[Print data] = Data : 11 fixed digits
[Coding Example]
Font type: UPC-A, Narrow bar width:03, Barcode height:120, Print data: 01234567890
<A>
<H>100<V>100<BL>H0312001234567890
<Q>2
<Z>
[Supplementary Explanation]
1. This command supports UPC-A only. When barcode type is specified other than “H”, command error occurs.
2. Setting of Guard bar, HRI and ratio is described as follows.
Guard bar
HRI
Ratio
Available
Nil
Fix
3. When the parameter value exceeds the range, operation is not supported.
4. When printing UPC-A with <D>, all character barcodes have the same height. When <BL> is uses, the height of the character
barcode of the start digit and the last digit have the same height of the guard bar.
UPC-A specifying <D> UPC-A specifying <BL>
UPC-A Barcode (Without HRI)
Guide bar
Guard bar
Guard bar
Guard bar
Character barcode
Character barcode
Character barcode
Character barcode
First digit
First digit
Last digit
Last digit