SATO LC400e Series - ESC+EU Composite Symbol

112
9.13 Barcode
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
9.13 ESC+EU Composite Symbol
ESC+EU
HEX Code
ESC
EU
Parameter
<1B>16
<42>16<55>16
aaabbn~n
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify the composite symbol.
[Format 1]
<EU>aabbccn~n
●Parameter
a
[Type of composite symbol] = 01 : GS1 DataBar Composite (CC-A/CC-B)
02 : GS1 DataBar Truncated Composite (CC-A/CC-B)
03 : GS1 DataBar Stacked Composite (CC-A/CC-B)
04 : GS1 DataBar Stacked Omni-Directional (CC-A/CC-B)
05 : GS1 DataBar Limited Composite (CC-A/CC-B)
06 : GS1 DataBar Expanded Composite(CC-A/CC/B)
/ GS1 DataBar Expanded Stacked (CC-A/CC-B)
07 : UPC-A Composite (CC-A/CC-B)
08 : UPC-E Composite (CC-A/CC-B)
09 : EAN13 Composite (CC-A/CC-B)
10 : EAN8 Composite (CC-A/CC-B)
b
[Narrow bar] = 01 to 12 dots
c
[Segment width] = 02 to 22 (Even number only)
* Only GS1 DataBar Expanded Composite (CC-A/CC-B) are supported
n
[Print data] = Data
Maximum number of digit for 1D barcode data
GS1 DataBar Composite (CC-A/CC-B)
13 digits
GS1 DataBar Truncated Composite (CC-A/CC-B)
13 digits
GS1 DataBar Stacked Composite (CC-A/CC-B)
13 digits
GS1 DataBar Stacked Omni-Directional (CC-A/CC-B)
13 digits
GS1 DataBar Limited Composite (CC-A/CC-B)
13 digits
GS1 DataBar Expanded Composite (CC-A/CC-B)
/ GS1 DataBar Expanded Stacked (CC-A/CC-B)
74 digits
UPC-A Composite (CC-A/CC-B)
11 digits
UPC-E Composite (CC-A/CC-B)
Specify with ”XX00000XXX” (X: variable) format.
Fixed 10 digits
EAN13 Composite (CC-A/CC-B)
12 digits
EAN8 Composite (CC-A/CC-B)
7 digits
- Check digit is automatically calculated and added.
- To specify the print of composite symbol, delimit one-dimensional data and two-dimensional data with ‘|’(7Ch).
Data = One-dimensional data | Two-dimensional data
-Data of GS1 DataBar Composite (CC-A/CC-B) are needed to be specified between the 1st and 16th digit of GS1 DataBar
Expanded Composite (CC-A/CC-B) data.
-GS1 DataBar Expanded Composite (CC-A/CC-B) can contain GS1 DataBar Composite (CC-A/CC-B) data and 74 digit of numeric
character and 41 digits of alphabet. (When numeric characters and alphabets are mixed, GS1 DataBar Composite
(CC-A/CC-B) data and 41 digit characters can be specified.
-When specified data don’t reach the maximum digits, blank is filleed by zero.
-2D data can contain up to 338 digits, but it varies by the type of Barcode.
-Barcode may stick out of the label depending on data and the number of digit, and scanner cannot read it. Adjust print data
beforehand so that the barcode can fit to the lable.
Composite Symbol