SATO LC400e Series - ESC+GC BMP File Re-Call

246
13.13 Memory Card
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
13.13 ESC+GC BMP File Re-Call
ESC+GC
HEX Code
ESC
GC
Parameter
<1B>16
<47>16<43>16
aaa
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify data re-call printing that is registered by BMP File Register Specification <GT>.
[Format]
<GC>aaa
● Parameter
a {Register Number} = valid range : 1~999
[Coding Example]
<A>
<V>100<H>100
<CC>1
<GC>001
<Q>2
<Z>
[Supplementary Explanation]
1.Rotate Specification <%> and Expandable Specification <L> is valid against re-call data.
2.When BMP File Re-Call Specification <GC> is used, Card Slot Specification <CC> shall be specified before BMP File Re-Call Specification
<GC>.
3.LC408e/412e does not support optional memory card. Please specify {Flash ROM} with Card Slot Specification <CC>.
BMP File Re-Call