SATO LC400e Series - ESC+~A Cut Unit Number

212
12.9 System
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
12.9 ESC+~A Cut Unit Number
ESC+~A
HEX Code
ESC
~A
Parameter
<1B>16
<7E>16<41>16
aaaa
Default Value
aaaa=1
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter is valid until the next specification is made.
Valid Range between Items
The set parameter becomes default value at next item <A>
[Function]
To specify cut unit number
[Format]
<~A>aaaa
● Parameter
a {Cut Unit Number} = valid range : 0~9999
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<XM>ABC
<~A>2
<Q>7
<Z>
ABC
7 labels
2 labels
remained 1 label
cut
cut
cut
cut
ABC
ABC
ABC
ABC
ABC
ABC
[Supplementary Explanation]
1.Valid only for cutter specification models.
2.Every 1 label will be cut when Multiple Cut Specification <A> is not specified at the Cut Motion Mode.
3.Do not perform cut when it is at a=0
4.Specify before Print Number Specification <Q>.
5.It cannot be used with the combination with Multiple Cut Specification <~>.
Label Feed Direction
Cut Unit Number