SATO LC400e Series - ESC+$= Outline Font Print

65
8.9 Font
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
8.9 ESC+$= Outline Font Print
ESC+$=
HEX
ESC
$=
Parameter
<1B>16
<24>16<3D>16
n~n
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify printing of outline font
[Format]
<$=>n~n
● Parameter
n {Print Data} = Data
[Coding Example] Print Data:SATO
<A>
<V>100<H>100<P>2
<$>A,100,100,1<$=>SATO
<Q>2
<Z>
[Supplementary Explanation]
1.Specify the Outline Font Shape Specification <$> before the Outline Font Print Specification <$=>.
2.The specify range of font height includes ascender and descender areas. For proportional, be careful with the outline font as letter
size width change accordingly with every font.
3.Font pitch can be specified by Character Pitch Specification <P>
4.The incline object is inclining at 15° within the font width specification. Ascender and descender areas are included within the height
specification.
5.Regarding the shape font of 1~9, if the specified font size is small, it is not easy to differentiate with the font.
6.If the font width, height specification of the Outline Font Shape Specification <$> is small, it may be damaged by the font.
[Valid Command]
Print Position
<V>
<H>
Modification
<P>
<%>
<$>
<F>
Calendar
*1
<WA>
*1 Not supported for LC408e/412e.
Outline Font Print