SATO LC400e Series - ESC+RE Telegraphic Message End

46
7.23 Modification
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.23 ESC+RE Telegraphic Message End
ESC
＋
RE
HEX Code
ESC
RE
Parameter
<1B>16
<52>16<45>16
a
Default Value
a＝0
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes default value at next item <A>
【Function】
To specify the telegraphic message end relates to small label
【Format】
＜RE＞a
● Parameter
a 「Operates when Ending」 ＝ 0：Discharge Motion
1：Discharge Motion ＋ Cut Motion
※ The motion becomes 0 (feed motion) when cutter is not available
【Coding Example】
＜A＞
＜
RE
＞
0
＜Z＞
【Supplementary Explanation】
1．After receiving Telegraphic End Specification <RE>, the editing of horizontal row will be ended and conduct feed motion.
As printing may end at the middle of horizontal row label due to the number of printing, so it is very common that the label
may turn out into plain white without any printing on it.
【Point】
1．Telegraphic End Specification<RE> is a command to specify telegraphic ending of small label at printer driver, therefore, it cannot
be combined with other standard command.
Telegraphic Message End