SATO LC400e Series - ESC+#E Print Darkness

203
12.2 System
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
12.2 ESC+#E Print Darkness
ESC+#E
HEX Code
ESC
#E
Parameter
<1B>16
<23>16<45>16
ab
Default Value
Refer to the table below
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is maintained
Valid Range within Items
The set parameter is valid until the next specification is done.
Valid Range between Items
The set parameter is valid until the next specification is done.
[Function]
To specify print darkness
[Format]
<#E>ab
● Parameter
a {Print Darkness Level Specification} = refer to the table below
b {Print Darkness Specification} = A~F (omittable)
Use{A}for normal condition
(Do not use{B~F})
*{B}is valid for use at LC408e, LC412e, CL412e, M-8400RVe, M-84Pro-6.
Specify{A~F}for print darkness specification based on applied label.
[Coding Example]
<A>
<#E>3
<Z>
[Supplementary Explanation]
1. Print darkness value that is set directly from command or printer LCD will be maintained.
[Point]
1.If value out of setting range is specified, it become command error but print darkness will not change.
2.Print darkness can be set at default value by printer default set operation.
[Parameter{a}Default Value and Valid Range]
Model Default Value Para
meter Valid
Range
Model Default Value
Parameter Valid
Range
LC408e/412e
CL408e/412e
M-8400RVe
M-10eDT/TT
M-5900RVe
M-8459Se
M-84Pro-2/3/6
3
：
Normal
1
：
Light
2：Medium Light
3：Normal
4：Medium Dark
5：Dark
CL608e/612e
M-8485Se/90
Se/60Se
2
：
Normal
1
：
Light
2：Normal
3：Dark
Print Darkness