SATO LC400e Series - ESC+EP Print End Position

210
12.7 System
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
12.7 ESC+EP Print End Position
ESC+EP
HEX Code
ESC
EP
Parameter
<1B>16
<45>16<50>16
NIL
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify label stop position at the sensor invalid mode
[Format]
<EP>
[Coding Example]
<A>
<A1>14240832
<Z>
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<EP>
<Z>
e.g.)
( )
の値は
12
ドット
/mm
[ ]
の値は
24
ドット
/mm
[Supplementary Explanation]
1 By using sensor invalid mode.
2. Specify as a set with Label Size Specification <A1>.
3. When Label Size Specification <A1> is specified at Format Register Specification <YS>, Form Overlay Register Specification <&S>, when
each Format Re-Call Specification <YR>, Form Overlay Re-Call Specification <&R> is specified, please specify the Print End Position
Specification <EP>.
ABCD
Label Feed Direciton
Stop position when <EP>
is not specified
Stop position when <EP>
is not specified
1424(dot)
Print End Position
80mm×100m
m
label
100mm
800dot
（
1200dot
）
【
2400dot
】
178mm
1424dot
（
2136dot
）
【
4272dot
】
80mm
640dot
（ 960dot
）
【1920dot
】
104mm
832dot
（
1248dot
）
【
2496dot
】
1
1
Start Position
Label Feed
Direction
Value of（ ）is 12dot/mm
Value of【 】is 24dot/mm