SATO LC400e Series - ESC+&S Form Overlay Register

233
13.4 Memory Card
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
13.4 ESC+&S Form Overlay Register
ESC+&S
HEX Code
ESC
&S
Parameter
<1B>16
<26>16<53>16
,aa,bbbb,cccc
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The registered data becomes valid
Valid Range within Items
The registered data is valid until the next specification is made.
Valid Range between Items
The registered data is valid until the next specification is made.
[Function]
To specify fixed print content to be registered to the memory card.
[Format]
<&S>,aa,bbbb,cccc
● Parameter
a {Register number} = valid range : 1~99
b {Horizontal Direction Size Specification of Window} = valid range : refer to the following page table (omittable)
c {Vertical Direction Size Specification of Window = valid range : refer to the following page table (omittable)
[Coding Example]
<A>
<V>100<H>100<XM>MODEL
<CC>1
<&S>,1
<Z>
[Supplementary Explanation]
1.Slot number that is used at Card Slot Specification <CC> shall be specified before Form Overlay Register Specification <&S>.
2.The registered format shall be mark off with Data Send Start Specification <A> ~ Data Send End Specification <Z>.
3.Same register number will not be registered.
4.Graphic Print Specification <G>, BMP File Print Specification <GM>, PCX File Print Specification <GP> data can be registered.
5.Although Form Overlay Register Specification <&S< can be registered to maximum 99 cases, still it depends on memory card.
6.Data that is registered by Form Overlay Register Specification <&S> can be cleared by using Clear Specification <*>R.
7.Form Overlay Register Specification <&S> cannot be used without memory card.
8.LC408e/412e does not support optional memory card. Please specify {Flash ROM} with Card Slot Specification <CC>.
[Valid Command]
Print Position
<V>
<H>
Modification
<WD>
<FW>
<(>
<RF>
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<OA>
<OB>
<RD>
<$=>
<K1>
*1
<K2>
*1
<K8>
*1
<K9>
*1
<k1>
*1
<k2>
*1
<k8>
*1
<k9>
*1
Barcode
<B>
<BC>
<BG>
<BI>
<BP>
<D>
<D><d>
<BD>
2-D Code
<BK>
*2
<BQ>
*2
<BV>
*2
<BX>
*2
<2D10>
*3
<2D12>
*3
<2D20>
*3
<2D30>
*3
<2D31>
*3
<2D32>
*3
<2D50>
*3
<2D51>
*3
Graphic
<G>
<GM>
<GP>
*1 Requires optional Kanji ROM. (Not supported for LC408e/412e.)
*2 Not supported for LC408e/412e.
*3 Supported for LC408e/412e only.
Form Overlay Register