SATO LC400e Series - ESC+2 D50 Datamatrix (ECC200)

193
10.13 2-D Code
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se
M-84Pro-2/3/6
LC408e/412e
10.13 ESC+2D50 DataMatrix (ECC200)
ESC+2D50
HEX Code
ESC
2D50
Parameter
<1B>16
<32>16<44>16<35>16<30>16
,aa,bb,ccc,ddd
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
Specifying DataMatrix Code (ECC200).
[Format] (Setup part)
<2D50>,aa,bb,ccc,ddd
●Parameter
a [Horizontal cell size] = Valid Range : 01 to 16 dots
a [Vertical line width] = Valid range : 01 to 16 dots
c [Number of cell in one line] = Valid Range : 010 to 144
000 : (Auto-setting)
d [Number of cell lines] = Valid Range : 008 to 144
000 : (Auto-setting)
[Format] (Data part)
<DN>mmmm,n to n
●Parameter
m
[Number of data] = Valid Range : 1 to 3116
n
[Print data] = Data
*When print 7EH, specify ”7EH, 7EH”
*If Parameter other than above is specified or print data don’t match, print is not secured.
[Coding Example]
Horizontal cell size: 3 dots, Vertical cell size: 3 dots
<A>
<V>100<H>200<2D50>,03,03,000,000
<DN>0010
，
0123456789
<Z>
[Supplementary Explanation]
1. If Parameter other than above is specified or print data don’t match, print is not executed
2. When specifying print format, secure more than 2mm blank space in for sides of the DataMatrix for read margin for the scanner.
3. When print data is 7EH, specify ”7EH, 7EH”Number of data will be “0002”.
4.When Auto setup (000) is applied for [Number of cell in one row] and [Number of cell lines] , square DataMatrix is printed
Data format
Number of data
Data format
Numeric
3116
Alphanumeric
2335
Binary (00H to FFH)
1556
DataMatrix (ECC200)