SATO LC400e Series - ESC+RI Label Size

42
7.19 Modification
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.19 ESC+RI Label Size
ESC
＋
RI
HEX Code
ESC
RI
Parameter
<1B>16
<52>16<49>16
aaaa,bbbb,cc,dd,eeee,ffff,gg,hh
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes valid until the next specification is
made
Valid Range between Items
The set parameter becomes valid until the next specification is
made
【Function】
To set information on label size
【Format】
＜RI＞aaaa,bbbb,cc,dd,eeee,ffff,gg,hh
● Parameter
a Horizontal Sheet Size (Label Area Width) ＝ valid range ： 1500～3200 (dot)
b Vertical Sheet Size (Label Area Height) ＝ valid range ： 480～3600 (dot)
c Horizontal Label Size ＝ valid range ： 0～60 (dot)
d Vertical Label Size ＝ valid range ： 00～60 (dot)
e Horizontal Label Size for Small Label (Label Size Width) ＝ valid range ： 480～3200 (dot)
f Vertical Label Size for Small Label (Label Size Height) ＝ valid range ： 480～3600 (dot)
g Horizontal Label Number ＝ valid range ： 01～06
h Vertical Label Number ＝ valid range ： 01～07
【Coding Example】
＜A＞
＜
RI
＞
2196,1236,24,36,0700,0400,03,03
＜A1＞12362196
＜RW＞02
＜Z＞
【Supplementary Explanation】
1．Label Size Specification <RI> data becomes error when it is different from Label Size Specification <A1>.
2．Number of label in horizontal column will be calculated automatically and printed out by Lable Size Specification <RI>.
【Point】
1．Label Size Specification <RI> is a command to set information relating to label size at printer driver. Therefore, it cannot be
combined with other standard command.
b
a
c
d
f
e
Label Feed Direction
Label Size