81
[Supplementary Explanation]
1. Register external word of width 24 X height 24 dot inside of internal memory
2. Code whish is specified at Registration Font Code Address combines itself with the “Kanji Code Mode” that is set in the printer, and then
specify address of either JIS Code or Shift JIS Code.
3. Area that has been registered before is valid for re-registration.
4. Outpur order of data is shown as follow.
5. If external word is registered inside of printer memory, it will be erased once printer power is turned OFF. In this case re-register is
necessary.
External Word File{24X24}
To register the above external word, D1 , D2 and D3 is formed by{00000000}, {00111100},{00000000}respectively.
Each D1, D2 and D3 data is <00>
16, <3C>16, <00>16.
Onwards, as such D4 is <00>
16, D5 is <3C>16 , D6 is <00>16. External Registration Data becomes specification of
<003C00003C00·····>
16 and until D72.
To Next Page
Loading...
