ERECTION AND DISMANTLING
37
SC4000 Pos 4
V23C_09.13
Evacuate the platform during the
test.
The test is to be carried out by trained
or authorized person only.
21. Assemble the third mast section and
the second part of hooter limit sig-
nalling bar.
Assemble the following two mast
sections.
22.
After an assembly of the rst ve
mast sections the test of the safety
brake should be carried out. The
plat form should be loaded with a
weight corre sponding the length
of the plat form (see loading tables
chapter 3).
a) SAFETY BRAKE TEST
- Connect the wires of the test
pendant control box E4 into the
level- ing electric box (see the
plat form elec tric chart at the end
of chapter 2. and drawing no. 4.36
below).
40-0295-287-2
-X8
ADAPTER
ADAPTER
+OP2
+OP2
-X9
+E4
Drawing 4.36. Safety brake test.
To Next Page
Loading...