SCANCLIMBER SC4000 - Daily Inspections

To Next Page

To Previous Page

OPERATIONAL INSTRUCTIONS

SC4000 Pos 5

V23C_09.13

5.4 DAILY INSPECTIONS

Drawing 5.96. Daily inspection form.

BEFORE OPERATING THE PLATFORM

CHECK THE FOLLOWING POINTS 1-19

AND FILL UP THE DAILY INSPECTION

FORM (CHAP TER 10) !!!

1. Check the basement ground.

2. Check the outriggers.

3. Check the horizontal and vertical position of the platform and

the mast.

4. Check the function of the pendant control.

5. Check the function of the emergency-stop.

6. Check the function of the emergency-lowering.

7. Check the contact and the condition of the rack and the pin ion.

8. Check the condition of the electric cables. Check also that the

cables are hanging free.

9. Check the platform xings and railings.

10. Check the mast sections and xing screws.

11. Check the function of the limit switches. Check the counterparts too.

12. Check the guiding rollers.

13. Check the safety brake.

14. Check the wall anchoring.

15. Check the mast guards.

16. Checkthe loose or missing parts.

17. Check that worksite is safety fenced.

18. Check the warning and instruction plates.

19. Check the working area.