SCANCLIMBER SC4000 - Inspections

SERVICE INSTRUCTIONS
4
V23C_09.13
SC4000 Pos 6
BEFORE OPERATING THE PLATFORM CHECK
THE FOLLOWING POINTS 1-19 AND FILL UP
THE DAILY INSPECTION FORM
(CHAPTER 10) !!!
1. Check the basement ground.
2. Check the outriggers.
3. Check the horizontal and vertical position of the platform and the mast.
4. Check the function of the remote control.
5. Check the function of the emergency stop.
6. Check the function of the emergency- lowering.
7. Check the contact and condition of the rack and the pinion.
8. Check the condition of the electric cables.
Check also that the cables are hanging free.
9. Checktheplatformxingsandrailings.
10. Checkthemastsectionsandxingscrews.
11. Check the function of the limit switches. Check the counterparts too.
12. Check the guiding rollers.
13. Check the safety brake.
14. Check the wall anchoring.
15. Check the mast guards.
16. Check the loose or missing parts.
17. Check that the worksite is safety fenced.
18. Check the warning and instruction plates.
19. Check the working area.
6.2. INSPECTIONS
6.2.1. DAILY INSPECTION
Drawing 6.1.Daily inspection form.