SCANCLIMBER SC4000 - Control Instructions: Lifting; Lowering

8
OPERATIONAL INSTRUCTIONS
V23C_09.13
SC4000 Pos 5
Preparation for control
MAST LOAD PLATFORM LENGTH PERSONS
1200 kg 12,5 m Max. 3 persons
SINGLE 1400 kg 10,5 m on the platform
1700 kg 7,4 m
2000 kg 4,2 m
2065 kg 31,4 m Max. 4 persons
TWIN 2680 kg 24,7 m on the platform
3500 kg 18,3 m
4200 kg 11,9 m
5.3. CONTROL INSTRUCTIONS
5.3.1. LIFTING / LOWERING
Control of the platform
- use hooter push-button S2 on the platform electric box before starting
- the platform is driven up or down by pushing the up or down button S4, S5
on the pendant controller or S7, S8 on the platform electric box OP2.
- connect the supply cable to the socket X1 on the chassis electric box
- switch on the main switch Q1 of the chassis electric box
- switch on the main switch Q2 of the platform electric box
- load the platform evenly, following the max. loading table:
Platform driving control can be
realised by:
a) using the drive buttons S7, S8 locat-
ed on the platform electric box OP2,
- connect the special plug X5.1 to the
socket -X5
0
-Q2.1
-S2
-Q2
-A1
option:
thermostat
-E1/-E2
+OP2
-P1
-X5
-X22
-XS7
-X8
9999h
1
-H3
Option:
drive hour
meter
-S7
-S1
-S8
STOP
E
M
E
R
G
E
N
C
Y
Drawing 5.5 Platform driving control re-
alised by the drive buttons located on
the platform electric box + OP2