Safety regulations
3
SC4000 Pos 3
V23C_09.13
3. SAFETY REGULATIONS AND
LOADING TABLES
1. Safety rules must be strictly ob served.
2. Dangerous places around plat form
should be marked with well visible
warning signs. The access of un au-
thorized persons to these premises
should be pre vented by means of
proper en clo sures, railings or fences.
3.1. NOTES
3. Inspections and main te nance should
be carried out according to the in-
structions.
4. Any modications (or appli cations)
done to the machine without a writ-
ten approval from the manu fac turer
are not allowed.
3.2. SAFETY RULES
1. All persons employed at supervision,
op eration, assembly and dis assem-
bly, main te nance and repairs of
the plat form and all persons using
the plat form are obliged to strict ob-
servance of local work and safety
rules, laws and regu lations.
2. Only the authorized persons like the op-
erators and maintenance tech nicians
are allowed to use the ma chine.
3. It is forbidden to overload the plat-
form during operation. Also the un-
pro fessional use of the machine is
for bidden.
4. It is forbidden to carry out assembly-
or disassembly works in strong wind.
(Wind speed exceeding 12,7 m/s.)
5.
When working with the platform it
must be controlled that all railings
have been assembled into their
places and the fastening of the rail-
ings has to be controlled also.
6. If a thunderstorm arises, stop working
immediately, switch off the elec tricity
and disconnect the feed ca ble.
7. It is forbidden to let the persons who
are not in good physical or mental
con dition to operate or work with a
plat form.
8. It is forbidden to let any un au thorized
persons to come to the premises of
the ma chine during its assembly or
operation.
9. There should not be any obstacles in
the operation area of the platform.
10. Check that there is no material stick-
ing out of the surface area of the
plat form. The movements of rolling
and moving equipment or ma chin ery
must be prevented.
11. The platform must be stationed at
the lowest position when entering,
loading or leaving it.
12. It is forbidden to carry out any
assem bly- or disassembly works of
the plat form or the mast while any
other works will be carried out on the
plat form.
13. All persons working at assembly and
dis assem bly, operation and main te-
nance of the platform should be in
good health and should full the re
quirements for working at heights.
To Next Page
Loading...