SC4000 Pos 2
13
V23C_09.13
Technical information
Drawing 2.11. Chassis drive unit and po sitions of the clutch lever.
CLUTCH LEVER
HORI ZON TAL
DRIVE
LEVER POSITIONS
TOWING
2.2.4. CHASSIS DRIVE UNIT
WARNING:
AFTER RELEASING THE
DRIVING MECHANISM
CLUTCH THE MACHINE
HAS NO BRAKES!
!
The unit consists of two main parts; the
gearmotor and the chain drive. It makes
the horizontal movements of SC4000
easier. Driving speed is 13 m/min.
Driving of the chassis can be done by the
same remote control box as driving of the
platform. The pendant control cable has
to be connected to the socket on chassis
electric box. Clutch is used by the clutch
arm. When towing the ma chine by tow
bar, move the clutch arm to towing-po-
sition.
To Next Page
Loading...