SCANCLIMBER SC4000 - Loading Tables SC4000 Single

Safety regulations
5
SC4000 Pos 3
V23C_09.13
• Platform loadings on wheel chassis
• Platform loadings on minichassis
• Loading table 1, freestanding platforms
• Loading table 2, freestanding with side platforms
• Loading table 3, freestanding with telescopic extensions
• Loading table 4, top anchored mast
• Loading table 5, anchored mast with side platforms
5.1, outriggers turned out
5.2, outriggers extended
• Loading table 6, telescopic extension
6.1 aluminium telescopic extension
3.3. LOADING TABLES SC4000 SIN GLE
!
The most usual loading variations are shown on the loading tables. There you can nd
the maximum wind speeds too. If other variations than those shown on the loading
tables are needed, please contact the distributor.
The following tables are situated on the next pages:
BEFORE STARTING TO WORK WITH THE
MACHINE ALWAYS GET ACQUAINTED
WITH THE LOADING TABLES!!