SCANCLIMBER SC4000 - SC4000 Single Assembly

ERECTION AND DISMANTLING
17
SC4000 Pos 4
V23C_09.13
4.6. ASSEMBLY IN STRUCTIONS
NOTE! DURING ASSEMBLY DO NOT FORGET TO FILL IN THE
ERECTION FORM (CHAP TER 10).
Drawing 4.8. SC4000 single.
- The outriggers on the mast side turned
out, extended and locked with pins
(the mast side = the side of the chas-
sis where the mast is erected),
- extend the outriggers on the wall side.
Lock with pins.
4.6.1. SC4000 SINGLE
1. Partly assembled platform should
be erected on well prepared base
at a suitable distance of the wall.
The suitable distance between the
ma chine and the wall is approx.
150- 250 mm.
20-0295-106-5-2
!
2A. Freestanding
Max. lifting height/platform length:
15/12,5 m.
Max. wind speed 12,7 m/s.