ERECTION AND DISMANTLING
18
V23C_09.13
SC4000 Pos 4
3. Lift the chassis by turning the drive
shafts equally so that the tyres do
not touch the ground. The distance
between the tyres and the ground is
usually about 30 mm. Do not for get
to use the wooden ground plates
under jacks.
- level the chassis and a mast on
ver tical position with the level in di-
cator.
- lock drive shafts
Drawing 4.9. SC4000 single - freestanding.
20-140295-1-2
Drawing 4.10. Location of the level indicator. Air gap 30 mm.
LEVEL INDICATOR
30 mm
2B. Freestanding
Max. lifting height / platform length:
15/12,5 m
Max. wind speed: 12,7 m/s.
- All outriggers turned out, extended
and locked with pins.
WARNING !
Drive shafts of all jacks shall be
locked
!
lock
To Next Page
Loading...