SERVICE INSTRUCTIONS
6
V23C_09.13
SC4000 Pos 6
NOTE:
DAILY, WEEKLY, MONTHLY AND QUARTER-OF-
A-YEAR IN SPECTIONS, POINTS 1-41
SHOULD ALSO BE CARRIED OUT.
6.2.2.3. QUARTER-OF-A-YEAR INSPECTION
CHECK THE FOLLOWING POINTS 36-41 AND FILL UP THE
FREQUENT INSPECTION FORM (CHAPTER 10)
Drawing 6.4. Frequent
inspection form.
NOTE:
DAILY, WEEKLY AND MONTHLY INSPECTIONS,
POINTS 1-34 SHOULD ALSO BE CARRIED OUT.
6.2.2.4. YEARLY INSPECTION
CHECK FOLLOWING POINTS 42-45 AND
FILL UP THE FREQUENT INSPECTION FORM
(CHAPTER 10).
Drawing 6.5. Frequent
inspection form.
!
!
36. Check the function of the motor brakes.
37. Check and clean the cooling fan covers of the
electric motors.
38. Check the condition of the pinion and the rack.
Measure tooth (6.4.).
39. Check the function of the platform levelling device
(twin).
40. Perform lubrications shown on the platform lubrica-
tion schedule (6.3.4) for every 360 hours of
operation.
41. Carry out the safety brake test (Chapter 4.) and
checktheexpirationdateofthesafetybrake.
42. Check and adjust the air gap of the motor brakes.
See instructions on chapter 9.
43. Check the connections of the electric cables.
De tailed check of electrical equipment with the
help of measuring instruments should be done.
44. Perform lubrications shown on platform lubrica-
tion schedule (6.3.4) for every 1400 hours of
operation.
45. Check that the safety brake is overhauled
(must be replaced every 4 years)