SCANCLIMBER SC4000 - Basic Delivery Scope

General information
8
V23C_09.13
SC4000 Pos 1
item description pcs
1. Wheel chassis 1
2. Telescopic outrigger with levelling jack 4
3. Centre jack 1
4. Ground plate 4+1
5. Tow bar 1
6. Chassis drive unit 1
7. Cable tray 1
8. Lifting frame 1
9. Mast section x)
10. Mast screw set 4 pcs / mast section
11. Mast top cap (with screw set 4 pcs) 1
12. Mast guard net 1
13. Mast guard net 1
14. Mast guard net 1
15. Counter part of limit switch (top and bottom position) 2
16. Signalling bar 2
17.
18. Platform section (1,68 x1,6 m) 4
19. Platform screw set 28
20. Railing (1,0 m) 5
21. Railing (1,6 m) 10
22. Railing with gate (1,6 m) 2
23. Railing coupler 2 (corner piece) with fastening screws 8
24. Railing coupler 1 (straight) with fastening screws 14
25.R. Railing coupler 3 (sidemounting) with fastening screws 2
25.L. Railing coupler 4 ( sidemounting) with fastening screws 2
26. Hex-socket cap-screw 38
27. Ladder 2
28. Side platform support 2
29. Side platform screw set 4
30. Anchor set x)
31. Top anchor pipes 2
32. Special tool (for platforms assembly) 1
33. Special tool (for jacks) 1
34. Platform section (1,68 x 1,0 m) (optional) 2
35. Special key (for safety brake) 1
36. Pendant control for drive of the chassis and
horizontal and vertical drive of the platform 1
37. Pendant control for safety brake test (single/twin unit) 1
38.R. Railing for basic platform section 1
38.L. Railing for basic platform section 1
x) Depending on the mast height
1.2. BASIC DELIVERY SCOPE OF SC4000 ON WHEEL
CHASSIS WITH 12.5 M PLATFORM (SEE PICTURE NO.
20-140295-1)