EasyManua.ls Logo

SCANCLIMBER SC4000 - Page 94

SCANCLIMBER SC4000
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ERECTION AND DISMANTLING
16
V23C_09.13
SC4000 Pos 4
00-1293-52-1
Drawing 4.7. Top anchoring.
MIN. 150 MM
MIN. 400 MM
Maximum load to anchor system swivel couplers is
5.5 kN. The limit is same also for top anchoring.
If load to couplers is bigger (see the shadowed
area on the table pages 10-12)a double an-
choring or a different type of anchoring must
be used.
Maximum load to anchor system couplers with
xed angle in new anchoring is 9.5 kN except for
diagonal 5.5 kN, when a swivel coupler is used in
diagonal. Picture below describes the anchoring
code PG100166.
If load is too big for anchoring, can double
anchoring be used. In this case results are
divided by 1,5.
Anch2
Anch1

Table of Contents