SCANCLIMBER SC4000 - Page 118

166 pages

To Next Page

To Previous Page

ERECTION AND DISMANTLING

V23C_09.13

SC4000 Pos 4

2. If there are nine (9) platform sections in

the middle plat form, the connection

bolts shall be M18 x 240 10.9.

Drawing 4.40.

M18 x 240 10.9

Main Page

Table of Contents3
General Information9
General Description9
Basic Delivery Scope of SC4000 on Wheel Chassis with 12.5M Platform14
Basic Delivery Scope of Sc4000 on Wheel Chassis with 12.5 M Platform14
Warranty Terms17
Technical Information20
Technical Specifications21
Technical Speci Fi Cations21
Technical Information and Elec Tric21
Optional Equipment26
Minichassis26
Telescopic Extensions27
Mast Assembly Crane30
Chassis Drive Unit31
Centre Jack32
Weather Cover33
Wall Anchoring33
Electrical Installation34
Requirements for the Supply Voltage35
Safety Regulations and Loading Tables39
Notes39
Safety Rules39
Loading Tables SC4000 Single41
Loading Tables SC4000 Twin52
Erection and Dismantling81
Introductory Notes81
Required Tools81
Tightening Torques for Screws and Nuts82
Preparatory Works83
Wall Anchoring Instructions84
Assembly Instructions95
Assembly in Structions95
SC4000 Single95
SC4000 Twin106
Connection Bolts of the Plat Form Sec- Tions by Long Platforms in Twin Units117
Assembly of the Telescopic Extensions119
The Check of Assembled Platform122
Platform Disassembly124
Operational Instructions125
Instructions/Warnings for the Operators127
Operational Instructions127
Operation Instructions128
Scope of Operator´s Responsibilities129
Procedures in Emergency Cases129
Control Instructions132
Lifting / Lowering132
Transfer with Chassis Drive Unit134
Safety Harness136
Daily Inspections137
Functional Troubles138
Service Instructions141
Platform Maintenance143
Service Instructions143
Inspections144
Daily Inspection144
Frequent Inspections145
Weekly Inspection145
Monthly Inspection145
Quarter of a Year Inspection146
Yearly Inspection146
Lubrication147
Capacity of Gear Oil Tanks147
Denotation of Oils and Greases Used148
Lubrication Periods148
Platform Lubrication Schedule149
Drawings Illustrating the Measurements and Adjustment Procedures152
Tightening Torques for Screws and Nuts153
Storage and Transport155
Storage Instruction155
Transport Instruction155
Inspection Forms161
Erection Form163
Daily Inspection Form164
Frequent Inspection Form165

SCANCLIMBER SC4000 - Page 118

Table of Contents