ERECTION AND DISMANTLING
45
SC4000 Pos 4
V23C_09.13
Activate the limit switches by mov-
ing the platform up and down. The
switche operates properly if the
movement stops and moving is possi-
ble only to opposite direction.
2. Check the tightening torque of
the mast section screws.
7. Check the guiding rollers latitude
to the rack.
3. Check the function of the limit
switche S11 top and bottom lim its.
4. Check the functions of
the platform.
5. Check the latitude between
guiding rollers and mast
section pipes.
6. Check the latitude of the rack and
the pinion .
Procedure
Scope of check
To Next Page
Loading...